ap2000p2080mcd

Replace coolant

Type ap · topic 20.00 · version 0302 · 2016-06-10

Applies to: Engine 660.9 in model 451.3/4

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 451 (models 3**, 4**) · Series 660 (models 9**)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 451 (models 3**, 4**) · Series 660 (models 9**)

AP20.00-P-2080MCD

Replace coolant

09.06.2016

Engine

660.9 in model 451.3/4

Modification notes

26.09.2014

Coolant mixing ratio

BF20.00-P-1001-04A

 Danger !	Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.	Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses.	AS20.00-Z-0001-01A
	Notes on coolant		AH20.00-N-2080-01A
	Check
1	Check coolant level		AP20.00-P-2010MCC
	Remove
2	Drain coolant	* not for USA
		

			AR20.00-P-1142MCD
	Install
3	Pour in new coolant	 Use approved anti-corrosion and antifreeze agents only.
		 Coolant mixing ratio	*BF20.00-P-1001-04A
		* not for USA
		

			AR20.00-P-1142MCD

 Coolant mixing ratio

Number	Designation				Engine all
BF20.00-P-1001-04A	Coolant mixing ratio	Antifreeze/water	Up to -37°C	%	50/50
			As of -38 °C	%	55/45
			Sheet		BB00.40-P-0310-01A
			Sheet		BB00.40-P-0325-00A
			Sheet		BB00.40-P-0326-00A

Referenced documents

ah2000n208001a Notes on coolant
ap2000p2010mcc Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration
ar2000p1142mcd Drain/fill in coolant
as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.