1 | Cap |
2 | Expansion reservoir |
P20.00-2302-11
| Check | ||
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
1 | Open expansion reservoir (2) | Slowly open up cap (1) and relieve overpressure, then unscrew cap (1). | |
2 | Check coolant for sufficient corrosion and antifreeze content | ||
Topical note | Notes on coolant | ||
| Engine 272, 273 in model 230 | ||
| Engine 156 in model 230 | ||
| Engine 273 in model 209 | ||
If the mixing ratio is incorrect, correct coolant composition: | |||
Use only approved anti-corrosion and antifreeze agents. | |||
3 | Check coolant level and correct if necessary | ||
Notes on coolant level | |||
| Engine 272, 273 in model 230 | ||
| Engine 156 in model 230 | ||
| Engine 273 in model 209 | ||
In the event of fluid loss not due to consumption: | |||
| |||
Check cooling system for leak tightness: | |||
4 | Seal expansion reservoir (2) with cap (1) |
Referenced documents
- ah2000n208001a Notes on coolant
- ah2000p114201cw Notes on coolant level
- ar2000p1010qb Inspect cooling system for leaks
- ar2000p1010rmg Inspecting cooling system for leaks
- ar2000p1010rx Inspect cooling system for leaks
- ar2000p1142qb Drain/pour in coolant
- ar2000p1142qb
- ar2000p1142rmg Drain/fill in coolant
- ar2000p1142rx Drain/pour in coolant
- ar2000p1142rx
- as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.