ap2000p2010gh

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

Type ap · topic 20.00 · version 0111 · 2019-04-11

Applies to: Engine 111, 112, 113, 612, 628 in model 163

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 163 · Series 628

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 163 · Series 628

Also applies to engines/gearboxes: 111 ***, 112 ***, 113 ***, 612 ***

AP20.00-P-2010GH

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

09.11.2018

Engine

111, 112, 113, 612, 628 in model 163

Check

Topical note

Notes on coolant

AH20.00-N-2080-01A

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

1

Open expansion reservoir cap

2

Check coolant level

Notes on coolant level

AH20.00-P-1142-01CW

Inspect cooling system for leaks

AR20.00-P-1010HA


up to "cold water level" marking.
Warm coolant:
approx. 1 cm above this marking.

If fluid loss is not consumption related, perform the following subject to a separate repair order:

3

Check anticorrosion/antifreeze in the coolant or coolant composition

Use only approved anti-corrosion agents/antifreeze.

If the coolant composition is not correct, correct coolant composition subject to separate repair order.

Referenced documents