Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

AP20.00-G-2010BM

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

11.08.2020

Engine

460.951/953 in model 000.001

 Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A



Check

1

Unscrew cap of expansion reservoir.

2

Check coolant level.

 Check and correct the coolant level only when the coolant temperature is between 0 °C and 20 °C.
The cooling system is correctly filled when the coolant is visible in the filler neck. Check the corrosion and antifreeze protection before correcting the coolant level.

3

Check anti-corrosion and antifreeze protection.

 To do so, remove coolant from the coolant circuit at a suitable position.

If the incorrect concentration of anticorrosion and antifreeze protection has been added,



correct the concentration of anticorrosion and antifreeze protection.

AP20.00-G-2010-01MT



Coolant specifications

BB00.40-P-0310-01A

 After obtaining special order.

4

Correct coolant level; to do so, add coolant up to "MAX" marking of coolant expansion reservoir.

5

Screw cap onto expansion reservoir.