ap2000b2050evi

Cooling and heating system - Check condition of radiator, lines and hoses

Type ap · topic 20.00 · version 0100 · 2018-04-18

Applies to: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 382 (models 155, 189) · Series 936 (models 9**)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 382 (models 155, 189) · Series 936 (models 9**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.5 Air conditioning assembly — Series 382 (models 155, 189) · Series 936 (models 9**)

AP20.00-B-2050EVI

Cooling and heating system - Check condition of radiator, lines and hoses

09.04.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Check

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Notes on coolant

AH20.00-B-2080-01A

1

Check the coolant level

AP20.00-B-2010EVI

Inspect the concentration of the anticorrosive/antifreeze additive, and correct if necessary.

2

Checking the cooling and heating system for tightness

In case of having a lot of dirt:

Clean the radiators externally, with separated invoicing.

3

Check radiator externally for dirt in the honeycomb

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

The radiator core and the intermediate spaces of the radiator and the aftercooler assembly should not be clogged by dirt.

4

Check radiator and expansion tank for damages

5

Check all hoses and pipings of the cooling system and heating

Check for damages and friction of cables with other parts, and the correct fixing.

If necessary, manufacture according to the installation requirements and fixation of cables, with separated invoicing.

In case of detecting damages or defects:

Replace the pipings and hoses with separated invoicing.

Referenced documents