ap2000b2010evi

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

Type ap · topic 20.00 · version 0100 · 2018-04-18

Applies to: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 382 (models 155, 189) · Series 936 (models 9**)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 382 (models 155, 189) · Series 936 (models 9**)

AP20.00-B-2010EVI

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

12.04.2018

Engine	936.9 in model 382.155/189
	with code MS6 (Euro VI)

Engine cooling system - check fluid level, adjust to correct level. Inspect
anticorrosion/antifreeze protection, adjust to correct concentration

1	Coolant reservoir cover
2	Coolant level sight glass
3	Coolant reservoir
4	Drain plug

B20.00-0074-01

	Check
 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
 Warning	Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.	Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses.	AS20.00-Z-0001-01A
Topical note	Notes on coolant		AH20.00-N-2080-01A
1	Loosen the cap (1) on the coolant reservoir (3)
2	Check the coolant level	 Before correcting the coolant level, check the anticorrosive/antifreeze proportion.
		 Correct the coolant level only when coolant temperature is between 0 °C and 20 °C.
3	Check proportion of the anticorrosive/antifreeze additive		AP20.00-B-2010-01A
		 It is necessary to remove the coolant in the radiator drain plug.
		If the proportion of the anticorrosive/antifreeze additive is below the specified proportion:
		
		Correct the proportion of the anticorrosive/antifreeze additive, with separated invoicing.
4	Correct the coolant level	 Fill the cooling system with coolant until the mark "MAX" in the coolant level sight glass (2).
		 Only use coolant with the prescribed composition.
		 Cooling system	*BF20.00-B-1001-01EVI

 Coolant

Number	Designation			Engine 936.9 in Type 382.155/189
BF20.00-B-1001-01EVI	Cooling system	Refueling volume	Litros	40
		Anticorrosion/antifreeze	CLASSES MB	325.5, MB 326.5

Referenced documents

ah2000n208001a Notes on coolant
ap2000b201001a Correcting anticorrosion/antifreeze concentration
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.
as2000z000101a Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.