ap2000a2010la

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

Type ap · topic 20.00 · version 0102 · 2011-11-14

Applies to: ENGINE 904.925 in MODEL 8AB390.053 /054 ENGINE 904.965 in MODEL 8AB390.053 /054

Where it sits

Function group 1 Engine › 20 Engine cooling system › 20.00 General — Series 390 (models 053, 054) · Series 904 (models 925, 965)

EinPAS 15 Engine › 15.25 Engine cooling system › 15.25.5 Coolant circuit, complete — Series 390 (models 053, 054) · Series 904 (models 925, 965)

AP20.00-A-2010LA

Engine cooling system - check fluid level, adjust to correct level. Inspect anticorrosion/antifreeze protection, adjust to correct concentration

10.11.11

ENGINE 904.925 in MODEL 8AB390.053 /054

ENGINE 904.965 in MODEL 8AB390.053 /054

Engine cooling system - check fluid level, adjust to correct level. Inspect     
	anticorrosion/antifreeze protection, adjust to correct concentration

A20.30-0006-01

1 Expansion reservoir

2 Cap

Checking

Danger!

Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant.

Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.

Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Notes on coolant

AH20.00-N-2080-01A

1

Detach cap (2)

2

Inspect anticorrosion/antifreeze protection

With a low coolant level, open the coolant drain plug and remove coolant.

Antifreeze tester (refractometer)

gotis://D_13/20_03.0

With a too low anticorrosion/
antifreeze concentration:

Correct anticorrosion/antifreeze protection.

AP20.00-A-2010-01LA

*BF20.00-N-1001-01L

3

Check coolant level

Only inspect coolant level and adjust to correct level if coolant temperature is below 50 °C.

The coolant must be between the min. and max. marking in the expansion reservoir (1), if necessary:

Correct the coolant level.

*BF20.00-N-1001-01L

4

Install cap (2)

Engine cooling system

Number

Designation

Engine
904.925
in model 390.053/054

Engine
904.965
in model 390.053/054

BF20.00-N-1001-01L

Coolant

Total filling capacity

l

27

27

Anticorrosion/antifreeze agent
down to -37°C

l

13.5

13.5

Specifications for Operating Fluids

Sheet

BB00.40-P-0310-01A

BB00.40-P-0310-01A

Sheet

BB00.40-P-0325-00A

BB00.40-P-0325-00A

Referenced documents