ap0020s0042eb

Reset service indicator

Type ap · topic 00.20 · version 0102 · 2020-03-12

Applies to: Model 447.6/7 Vehicle with steering wheel buttons and without ASSYST Model 448.7 Vehicle with steering wheel buttons and without ASSYST

Where it sits

Function group 0 Overall › 00 Overall vehicle › 00.20 Maintenance, service system (FSS, ASSYST) — Series 447 (models 6**, 7**) · Series 448 (models 7**)

EinPAS 10 Service › 10.30 Maintenance › 10.30.30 Maintenance — Series 447 (models 6**, 7**) · Series 448 (models 7**)

AP00.20-S-0042EB

Reset service indicator

05.03.2020

Model

447.6/7

Vehicle with steering wheel buttons and without ASSYST

Model

448.7

Vehicle with steering wheel buttons and without ASSYST

Reset service indicator

1

"System selection" button

2

"Accept call" button

3

"OK" button

4

"Scroll forward" button

5

"Exit menu" button

6

Multifunction display

G00.20-3160-11

Dialing

1

Close doors.

2

Turn key in ignition lock into position "1".

The standard display (total distance) must appear in the multifunction display (6), if necessary press the "Scroll forward" button (4) repeatedly.

3

Repeatedly press system selection button (1) until menu item "Trip" is highlighted on the multifunction display (6).

"Trip" remains selected for approx. 5 s. Operation step 4 must be carried out within this time.

4

First press and hold down Accept call button (2) and then, within 1_second, also press the OK button (3) and hold for approx. 5_seconds.

The multifunction display (6) shows the Workshop menu with the "Vehicle data", "Dynamometer test" and "ASSYST PLUS" tabs.
On vehicles with fixed maintenance intervals, without ASSYST maintenance computer, "ASSYST PLUS" also appears in the display.

5

Press the "Scroll forward" button (4) repeatedly until "ASSYST PLUS" is highlighted and confirm selection with the "OK" button (3).

Read out maintenance data

6

Select "Service data" tab and confirm with "OK" button (3).

7

Note down the service code (e.g. "A") shown on the multifunction display (6).

8

Press "Scroll forward" button (4) repeatedly and read out remaining time, remaining distance and oil data record (e.g. "01 1F 00").

9

Note down the readout data.

10

Press "Exit menu" button (5) repeatedly until standard display (total distance) appears in the multifunction display (6).

Reset service data

11

Turn key in ignition lock into position "2".

Only on model 447.6/7 with engine 622

12

Press "System selection" button (1) repeatedly until workshop menu with "Vehicle data", "Dynamometer test" and "ASSYST PLUS" tabs appears in multifunction display (6).

13

Press the "Scroll forward" button (4) repeatedly until "ASSYST PLUS" is highlighted and confirm selection with the "OK" button (3).

The workshop menu with the "Service data", "Full service" and "Oil measurement" tabs appears in the multifunction display (6).

14

Press the "Scroll forward" button (4) repeatedly until "Full Service" is highlighted and confirm selection with the "OK" button (3).

The multifunction display (6) then shows, e.g. "Service A" and "Confirm with OK".

15

Confirm with "OK" button (3).

The multifunction display (6) shows the oil selection.

16.1

Select specification of used engine oil using scroll forward button (4) and confirm selection with OK button (3).

Engine 622.8/9

Service Information: Oil specification

Engine 622.8

SI18.00-S-0013B

The multifunction display (6) then shows "Service conducted".
To achieve the maximum kilometer interval, engine oil for engine 622.9 that complies with the Specifications for Operating Fluids, Sheet 228.51 must be used and confirmed.

16.2

Select specification of used engine oil using scroll forward button (4) and confirm selection with OK button (3).

Engine 651.9

The multifunction display (6) then shows "Service conducted".
To achieve the maximum kilometer interval, the engine oil that complies with the Specifications for Operating Fluids, Sheet 228.51, 229.51/.52 must be used and confirmed.

16.3

Select specification of used engine oil using scroll forward button (4) and confirm selection with OK button (3).

Engine 654.9

The multifunction display (6) then shows "Service conducted".
To achieve the maximum kilometer interval, engine oil that complies with the Specifications for Operating Fluids, Sheet 229.51/52/71 must be used and confirmed.

16.4

Select specification of used engine oil using scroll forward button (4) and confirm selection with OK button (3).

Engine 274.9

The multifunction display (6) then shows "Service conducted".
To achieve the maximum kilometer interval, engine oil that complies with the Specifications for Operating Fluids, Sheet 229.5 must be used and confirmed.

17

Press "Scroll forward" button (4) until "Yes" is highlighted, and confirm selection with "OK" button (3).

"Reset not possible" is shown on the multifunction display (6).

18

Press "Scroll forward" button (4) until "Confirm" is highlighted, and confirm selection with "OK" button (3).

"Full service completed" is shown on the multifunction display (6).

If the service is not performed or only partly performed after resetting the maintenance computer,

reset service indicator to previous service.


AP00.20-S-0044E

Deactivation

19

Press "Exit menu" button (5) repeatedly until standard display (total distance) appears in the multifunction display (6).

20

Turn key in ignition lock into position "0".

Referenced documents