B00.20-0105-01
Engines BR 300
Inspection between 20 and 100 hours
(between 1,000 and 5,000 Km)
Customer: | Job Order Nr: | ||
Date: | Confirm the jobs to be carried out with the Customer: | ||
Mechanic: | |||
Performed worksMark with “x” | Conditions of the vehicle when it came to the workshop (if this item is not in order, mark it with “x”). | ||
Lubrication services | |||
Oil change | |||
◻ | Valves: Adjust the valves with the engine cold or at least 30 minutes after its shutdown | ||
◻ | V-Belts (fan actuation): Check the conditions. If necessary, adjust the belts' tension. | Engines: 372.9, 374.9, 376.9, 377.9 | |
◻ | Engines: 372.9, 374.9, 376.9, 377.9, 382.9 | ||
◻ | Engines: 376.9, 377.9 | ||
◻ | Fuel pre-filter: Clean the filtering element. | Engines: 374 | |
◻ | Engines: 376/377 | ||
◻ | Air filter with paper element: Clean the automatic dust discharge valve. | ||
◻ | |||
◻ | Electric system: Check the fastening of the electric cables at the starter motor terminals, alternator, batteries and ground connections. Check whether the electric cables do not present friction points with components or with the vehicle's structure. | ||
Check the tightness and the condition | |||
◻ | Cooling system: Radiator, hoses and tubes | ||
◻ | Fuel and lubrication system: Tubes and flexible units of the fuel and engine oil | ||
◻ | Intake system: Intake tube between the air filter and the engine. | Engines: 374 | |
◻ | Engines: 376/377 | ||
Check whether the bolts and nuts are tightened. Retighten, if necessary | |||
◻ | Engine: Injection tubes, flange and intake manifold, hoses' clamps and flexible tubes, fuel and lubricant oil tubes, oil pan (engines of the 300 series), engine mounts. | Engines: 376/377 | |
◻ | Engines: 374/376/377 | ||
Check the level and supply if necessary | |||
◻ | Cooling system: | Engines: 376/377 | |
◻ | Engines: 374/376/377 | ||
◻ | Engines: 374 |