an8050p0100e

Retrofit interior motion sensor

Type an · topic 80.50 · version 0101 · 2004-10-20

Applies to: MODEL 208.3 with CODE (551a) Antitheft alarm system (ATA)

Where it sits

Function group 3 Body › 80 Central locking system, convenience operation, drive authorization systems › 80.50 Anti-theft alarm system (ATA), Interior motion sensor/Tow sensor — Series 208 (models 3**)

EinPAS 29 Drive authorization/security system › 29.20 Anti-theft alarm system › 29.20.3 Retrofitting/modification — Series 208 (models 3**)

AN80.50-P-0100E

Retrofit interior motion sensor

3.5.99

MODEL 208.3 with CODE (551a) Antitheft alarm system (ATA)

Retrofit interior motion sensor

P80.50-2152-12

A26/4 Left infrared (IR) interior motion sensor transmitter-receiver

A26/5 Right infrared (IR) interior motion sensor transmitter and receiver

Removing

1

Remove trunk floor

2

Disconnect ground cable of battery

AR54.10-P-0003A

3

Remove fuse box in trunk

Do not disconnect lines

AR54.15-P-1324A

4

Remove left and right hand trunk lining

5

Expose PSE control module

6

Remove front seat

left and right

AR91.10-P-1000K

7

Remove rear seat cushion

8

Remove paneling on B-pillar

left and right

AR68.30-P-4700K

9

Remove paneling on right C-pillar

left and right

AR68.30-P-4490K

10

Remove left and right door sill molding

11

Remove rear passenger compartment side trim panel

left and right

AR68.30-P-4780K

12

Remove rear left and right grab handles

13

Remove floor covering at rear left and right and place to one side

14

Remove floor covering at front left and right and place to one side

15

Open cable ducts at left and right in the center

Installing

16

Prepare B-pillar paneling for installation of interior motion sensor transmitter and receiver

AN80.50-P-0100-06A

17

Retrofit wiring harness

Interior motion sensor wiring harness

AN80.50-P-0001-01G

18

Retrofit interior motion sensor transmitter and receiver

AN80.50-P-0100-01B

19

Fit remaining parts to vehicle

20

Check functionality of interior motion sensor

21

Amend special equipment code 882 in FDOK

Parts ordering notes

Part no.

Designation

Quantity

Design group 82

Left infrared (IR) interior motion sensor transmitter-receiver

1

Design group 82

Right infrared (IR) interior motion sensor transmitter and receiver

1

Design group 82

Interior motion sensor wiring harness

1

Design group 82

Switch

1

Design group 82

Cap

2

Referenced documents