ar6830p4490k

Removing and installing lining on C-pillar

Type ar · topic 68.30 · version 0105 · 2010-01-19

Applies to: MODEL 208.3

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 208 (models 3**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 208 (models 3**)

AR68.30-P-4490K

Removing and installing lining on C-pillar

18.1.10

MODEL 208.3

Removing and installing lining on C-pillar

P68.30-0489-04

1 C-pillar paneling

2 Combination clips

3 Paneling in rear

Removal, installation

1

Remove paneling on B-pillar

AR68.30-P-4700K

2

Unclip paneling (1) toward middle

(6 combination clips)

3

Pull paneling (1) out of rear shelf toward front and remove paneling in rear

(3 hooks, arrows).

4

Put paneling down (1)

To completely remove the paneling (1) detach seat belt end fitting and guide seat belt through.

*BA91.40-P-1001-01A

5

Reinstall in opposite order

Seat belts/emergency tensioning retractors

Number

Designation

Model
202, 208.3

Model 208.4

Model 210

BA91.40-P-1001-01A

Bolt on seat belt end fitting

Nm

35

35

35

Referenced documents