Adaptive damping system (ADS II) diagnosis, troubleshooting · ad3232p5000a · Mercedes-Benz WIS

AD32.32-P-5000A

Adaptive damping system (ADS II) diagnosis, troubleshooting

24.2.97

MODEL 129 as of 1.9.95

Complaints	Possible cause	Notes	Test step/remedy
ADS MIL(Ale27) illuminates when engine is running	Steering angle sensor (N49) not initialized Fault stored		Turn steering wheel from stop to stop Read out HHT fault memory
Damping too hard/too soft			Read out HHT fault memory AD32.32-P-7004-01A
Vehicle level too low (basic level)			Test and repair work Chassis alignment check AR40.20-P-0300C AR40.20-P-0301C AR40.20-P-0301D
Vehicle lowers when engine is switched off			Read out HHT fault memory Check for external leaks (visual inspection) AD32.32-P-7002A AD32.32-P-7003A
Vehicle lowers at front axle			Read out HHT fault memory Check for external leaks (visual inspection) AD32.32-P-7002A
Vehicle lowers at rear axle			Read out HHT fault memory Check for external leaks (visual inspection) AD32.32-P-7003A
Vehicle does not lift up at one or both axles			Read out HHT fault memory Check for external leaks (visual inspection) AD32.32-P-7001A AD32.32-P-7005A AD32.32-P-7002A AD32.32-P-7003A
Oil level too low			Check for external leaks (visual inspection)

ad3232p7001a Adaptive damping system (ADS II), testing hydraulics of valve unit
ad3232p7002a Adaptive damping system (ADS II), testing hydraulics of front axle circuit
ad3232p7003a Adaptive damping system (ADS II), testing hydraulics of rear axle circuit
ad3232p700401a Damper valves, testing hydraulics of adaptive damping system (ADS II)
ad3232p7005a Adaptive damping system (ADS II), testing hydraulics of level adjustment
ar4020p0300c Checking vehicle level at front and rear axles
ar4020p0301c Check vehicle level at front and rear axle with electronic inclinometer, adjust if necessary
ar4020p0301d Check vehicle level at front and rear axle with electronic inclinometer, adjust if necessary