Fuel injection and ignition system (HFM-SFI) diagnosis, advanced information

AD07.51-P-2000B

Fuel injection and ignition system (HFM-SFI) diagnosis, advanced information

19.11.2019

Engine

104 in model 463

 Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

 Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Topical note

Notes on avoiding damage to ignition system

Motor 104

AH15.10-P-0002-01D

Connecting and using test equipment

AD00.00-P-1000AZ

Tools for testing electrical system of HFM sequential multiport fuel injection/ignition system

AD07.51-P-2000-02B

Connecting diagram for socket box, testing electrical system (HFM-SFI)

AD07.51-P-2000-03B

Signal traces, ignition system (HFM-SFI)

AD07.51-P-2000-05B

Coupling assignment for engine control module (HFM-SFI)

AD07.51-P-2000-06B

Connecting diagram for pulse counter/Hand-Held Tester (HFM-SFI)

Up to 08/96

AD07.51-P-2000-07B

Notes on fault memory

AD07.51-P-2000-08B

Correction positions of variable reference resistor (HFM-SFI)

Up to 03/95 (HHT diagnosis identifier 46)

AD07.51-P-2000-09B

Fuel injection and ignition system (HFM-SFI) notes on immobilizer

AD07.51-P-2000-10A

Notes on testing with Hand-Held Tester HFM-SFI

AD07.51-P-2000-12A

Notes on testing with pulse counter HFM-SFI

Up to 03.95 (HHT diagnosis identifier 46)

AD07.51-P-2000-13A

Signal patterns HFM-SFI fuel injection system

AD07.51-P-2000-14A

Signal patterns HFM-SFI cruise control/idle speed control

As of 04/95 (HHT diagnosis identifier 49)

AD07.51-P-2000-15A

Tools, fuel pressures, testing hydraulics (HFM-SFI)

AD07.51-P-2001-01B

Test connection for fuel pressures (HFM-SFI)

AD07.51-P-2001-02B

Tools, fuel pumps, testing hydraulics (HFM-SFI)

AD07.51-P-2002-01B

Connecting diagram for socket box, testing fuel pumps (HFM-SFI)

AD07.51-P-2002-02B

Notes on arrangement of fuel pump relay fuel pump HFM-SFI

AD07.51-P-2002-04A

Tools, fuel injection valves, testing hydraulics (HFM-SFI)

AD07.51-P-2003-01B

Connecting diagram for socket box, testing fuel injection valves (HFM-SFI)

AD07.51-P-2003-02B

Spray pattern, testing fuel injection valves (HFM-SFI)

AD07.51-P-2003-03B

Hot film engine management (HFM-SFI) fuel injection and ignition system positionof components

GF07.51-P-0001-02D

Line connections

GF07.51-P-0001-02E

Valves and control units

GF07.51-P-0001-02F

Wiring diagram HFM-SFI sequential multiport fuel injection/ ignition system

Engine 104.996 in model 463 as of 01.01.96 up to 31.05.12 Engine compartment/frame floor system wiring harnesses

PE07.51-P-2000H

Engine 104.996 in model 463 as of 01.01.96 up to 31.05.12 Engine block wiring harnesses

PE07.51-P-2000I