AD00.19-P-3003A | Extended vehicle network (EVN) diagnosis operational check actual values | 8.4.97 |
MODEL 202 as of 1.6.97,
208, 210.081 /281,
210 as of 1.3.97
Extended vehicle network (EVN) diagnosis, previous knowledge | |||
I | Fuses in order. | ||
II | Battery voltage >11 V | ||
III | Connect Hand-Held Tester to data link connector (DTC readout) (X11/4) in accordance with connecting diagram | ||
IV | Voltage supply of control modules and CAN data buses in order | ||
V | All CAN data buses connected | ||
Function check | |||
Test step/ Scope of test | Operation/Requirement | Specified value | Possible cause/Remedy |
1 CAN low | | ||
2 CAN high | | ||
3 electronic ignition switch control module coded | | Code electronic ignition switch control module (N73) | |
4 PSE/PE coded | | Code PSE control module (combined) (A37) | |
5 SAM coded | | Code driver-side signal-acquisition and actuation module (SAM) (N10/1) | |
6 Lower control field control module coded | | Code lower control field control module (N72) | |
7 DBE coded | | Code overhead control panel control module (N70) | |
8 TSG 1 coded | | Code front driver-side door control module (N69/1) | |
9 TSG 2 coded | | Code front passenger-side door control module (N69/2) | |
10 TSG 3 coded | | Code rear driver-side door control module (N69/3) | |
11 TSG 4 coded | | Code rear passenger-side door control module (N69/4) | |
12 ESA L coded | | Left front ESA control module (with memory) (N32/1) | |
13 ESA R coded | | Right front ESA control module (with memory) (N32/2) | |
14 SVMCM coded | | Code special vehicle multifunction control module (SVMCM) (N26/9) | |
15 UVS coded | | Code rollover bar (RB)/soft top operation control module (N52) |
Referenced documents
- ad0000p1000az Connecting and using test equipment
- ad0019p2000a Extended vehicle network (EVN) diagnosis previous knowledge
- ad0019p6000a Extended vehicle network (GVN), electrical system test