Disassemble and assemble heater housing

Τύπος ar · θέμα 83.25 · έκδοση 0103 · 2003-09-15

Ισχύει για: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic" MODEL XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (HH9) Automatic air conditioning "Tempmatic"

Δεν είναι διαθέσιμο στα «el»· εμφανίζεται στα Αγγλικα.

AR83.25-D-1001D

8.2.01

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"

MODEL XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 except CODE (HH9) Automatic air conditioning "Tempmatic"

D83.25-1108-12

1 Bolt

2 Heater housing cover

3 Gasket

4 Heater housing

5 Wiring harness

6 Bolt

7 Heat exchanger

8 Connector

9 Gasket

10 O-Ring

 	Disassembling, assembling
1	Remove gaskets (3 and 9)	 Installation: Clean sealing surfaces and install new gaskets.
2	Remove heater housing cover (2)
3	Remove heat exchanger (7) from the heater housing (4)
4	Remove wiring harness (5)
5	Unscrew connecting piece (8)	 Installation: install new O-rings (10).
6	Assemble in reverse order