AR42.10-D-0900AD | Remove/install compressed-air line connector | 15.8.07 |
MODEL 668, 670 with ENGINE 900.9 with CODE (B16) Hydraulic 2-circuit / compressed air 2-circuit brakes
with compressed air connector VOSS 232 (NG 8, NG 12)
W42.10-1141-12
1 Retaining screw
2 Connector
3 O-ring
| Remove/install | ||
| Notes on compressed air connection systems | ||
1 | Release reservoir air from compressed air system | ||
2 | Unscrew retaining screw (1) and disconnect connector (2) with compressed air line | Disassemble defective compressed air connector. See | |
Disassemble/assemble compressed air connector | |||
Installation: Install new O-ring (3). | |||
| |||
| |||
| |||
| |||
| |||
3 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
4 | Allow engine to run, fill compressed air system completely, switch off engine and check compressed air connector for leaks |
Compressed-air line connectors
Number | Designation | Model | ||
BA43.00-N-1002-01C | Retaining screw, compressed air line to compressed air reservoir | M221.5 | Nm | 12 |
BA43.00-N-1003-01C | Retaining screw, compressed air line to compressed air distributor | M161.5 | Nm | 12 |
000 589 28 01 00
Torque wrench
Open end wrench
Open end wrench
000 589 27 01 00
001 589 75 21 00
Έγγραφα που αναφέρονται
- ah0018n000101a Οδηγίες για το σύστημα συρταρωτών συνδέσεων πεπιεσμένου αέρα
- ar4210w095001a Αποσυναρμολόγηση, συναρμολόγηση συνδέσμου πεπιεσμένου αέρα
- as0000z000501a Κίνδυνος ατυχήματος λόγω αυτόματης εκκίνησης κατά τη λειτουργία του κινητήρα. Κίνδυνος τραυματισμού με μώλωπες και εγκαύματα σε �