Removing and installing camshaft Hall sensor · ar1510s2000b · Mercedes-Benz WIS

AR15.10-S-2000B

Removing and installing camshaft Hall sensor

17.10.98

ENGINE 611.980 in MODEL 638.094 /194 /294
with CODE (MQ4) Engine OM611 DE22 LA (75 kW)
with CODE (MQ5) Engine OM611 DE22 LA (90 kW)

ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)

S15.10-2506-06

1 Connector

2 Bolt

B48 Camshaft Hall sensor

 	Removing, installing
1	Remove trim panel of cylinder head cover		AR01.20-S-5015A
2	Unplug connector (1) at camshaft Hall sensor (B48)
3	Unscrew bolt (2) of camshaft Hall sensor (B48) at cylinder head cover		*BA15.10-N-1001-03A
			*001589760900
4	Remove camshaft Hall sensor (B48) at cylinder head cover	 Installation: replace O-ring
5	Install in the reverse order
 Danger!	Risk of accident as a result of vehicle starting off when engine running. Risk of injury as a result of bruises and burns if you insert your hands into engine when it is being started or when it is running.	Secure vehicle to prevent it starting off. Wear closed and close-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
6	Run engine and inspect for leaks

 Position sensor

Number	Designation		Engine 611.980


BA15.10-N-1001-03A	Bolt of camshaft Hall sensor to cylinder head cover	Nm	11

External torx set

001 589 76 09 00

ar0120s5015a
as0000z000501a Κίνδυνος ατυχήματος λόγω αυτόματης εκκίνησης κατά τη λειτουργία του κινητήρα. Κίνδυνος τραυματισμού με μώλωπες και εγκαύματα σε �