AR42.30-B-0160B | Remove/install ABS measuring ring | 12.02.16 |
Vehicle 364.### #C, 364.### #B, 364.### #D, 382.1## #C, 382.1## #B, 382.1## #D, 386.### #C, 386.### #B, 386.### #D, 388.### #C, 388.### #B, 388.### #D
Vehicle 634.0## #C, 634.0## #B, 634.0## #D, 660.### #C, 660.### #B, 660.### #D, 664.### #C, 664.### #B, 664.### #D, 695.### #C, 695.### #B, 695.### #D
B35.20-0021-01
1 Wheel hub
2 ABS tooth ring
3 Brake shoe support
4 Axle stub
5 Fastening sleeve
6 ABS sensor
| Remove and install | ||
1 | Remove the rear wheel hub (1) | ||
2 | Remove the splash guard from the wheel hub (1). | | |
3 | Remove the tooth ring (2) from the wheel hub (1) | Installing: Install the ring in cold condition. Measure lateral run out. | |
4 | Install in reverse order |
Antilock brake system (ABS)
Número | Denominação | Rear axle 739.39 | |||
BE42.30-B-1001-01A | Maximum lateral deviation of the toothed ring of the ABS/ASR system | mm | 0.15 | ||
055 589 19 15 00
Installation device
Referenzierte Dokumente
- ar3520b0310a Radnabe hinten aus-, einbauen
- ar3520b0310a