Remove/install PTO · ar2645b0001e · Mercedes-Benz WIS

AR26.45-B-0001E

Remove/install PTO

12.02.16

Manual transmission 715.504, 718.460, 718.461, 718.462, 718.464, 718.465

W26.45-0073-06

1 Power take-off

2 Hollow bolt

3 Sealing washers

4 Pneumatic piping

5 PTO attachment bolts

6 Power take-off gasket

7 Centering ring (not applicable on gearboxes 715.320

8 Snap-ring (not applicable on gearboxes 715.320

9 Ball bearing (not applicable on gearboxes 715.320)

10 Input shaft (not applicable on gearboxes 715.320)

11 Connector of the PTO control switch

12 Connector of the PTO solenoid valve

	Remove and install
1.1	Remove and install the additional group actuation.	 Depending of the additional group.  Version NA 2b.
1.2	Remove the hydraulic pump.	 Whenever possible we recommend not to detach the hydraulic pipes. However, if they are detached, catch (and do not re-use) the hydraulic fluid. Version NA2c.	AR26.45-B-0002C
2	Remove the pneumatic piping (4) from the solenoid valve.		*BA26.45-B-1010-01B
3	Disconnect the connectors (11) and (12) from the respective outlets.
4	Remove the power take-off (1).	 Installing: Replace the PTO gasket (6). Apply sealing compound on the bolts (5).	*BR00.45-B-1012-01A
			*BA26.45-B-1003-01B
5	Remove the input shaft (10) with the ball bearing (9) and the centering ring (7).	 Check the input shaft and the ball bearing for wear, if necessary replace them.
6	Install in reverse order.
7	Check the oil level in the gearbox and replenish it if necessary.		AP26.00-B-2601A

PTO

Número	Denominação			Gearbox 715.5 with CODE N05


BA26.45-B-1003-01B	Power take-off attachment bolts in the gearbox	8.8	Nm	50
		10.9	Nm	60
BA26.45-B-1010-01B	Compressed air piping in the electromagnetic valve		Nm	15

Produtos para reparos

Número	Denominação	Número de pedido
BR00.45-B-1012-01A	Sealing product - Loctite 5900	A 002 989 73 20