ap4720b0780a

Replace fuel filter

Typ ap · Thema 47.20 · Version 0100 · 2016-02-12

Gültig für: Cumbustion engine 475 with Vehicle 382.073, 382.070, 382.081, 382.087Cumbustion engine 475 with Vehicle 386Cumbustion engine 475.9, 476.9 with Vehicle 664.### #C, 664.### #DCumbustion engine 476 with Vehicle 382.084, 382.085, 382.083Cumbustion engine 476 with Vehicle 388

Nicht verfügbar in „de“; angezeigt wird Englisch.

Einordnung

Funktionsgruppe 1 Motor › 47 Kraftstoffanlage, Energieversorgung Antriebsstrang › 47.20 Kraftstoffpumpe, Filter — Baureihe 382 (Baumuster 070, 073, 081, 083, 084, 085, 087) · Baureihe 386 · Baureihe 388 · Baureihe 664

EinPAS 16 Kraftstoff-/Energieversorgung Motor › 16.10 Kraftstoffversorgung › 16.10.41 Filter/Wasserabscheider — Baureihe 382 (Baumuster 070, 073, 081, 083, 084, 085, 087) · Baureihe 386 · Baureihe 388 · Baureihe 664

Gilt auch für Motoren/Getriebe: 475 ***, 475 9**, 476 ***, 476 9**

AP47.20-B-0780A

Replace fuel filter

12.02.16

Cumbustion engine 475 with Vehicle 382.073, 382.070, 382.081, 382.087

Cumbustion engine 475 with Vehicle 386

Cumbustion engine 475.9, 476.9 with Vehicle 664.### #C, 664.### #D

Cumbustion engine 476 with Vehicle 382.084, 382.085, 382.083

Cumbustion engine 476 with Vehicle 388

Replace fuel filter

B07.00-0041-01

1 Housings of the filtering elements

2 Fixation screws

Access for maintenance and repair job execution varies according to the body type/manufacturer.

Refer to body maker instructions.

Remove and install

Danger!

Safety measures to deal with fuel

It is not allowed to smoke, to start fires, sparks, open flames. Only keep fuel in appropriate recipients duly correspondingly identified. When handling fuel, use appropriate protective equipment and clothes

AS47.00-B-0001-01A

1

Remove the fastening bolts (2).

2

Remove the housings (1)

Wash the housings with Diesel fuel.

3

Remove the filtering elements

When installing, replace the filtering elements, the sealing rings located in the filter head and the copper rings of the fastening bolts (2).

Should there be detected water or if the removed filtering elements are too dirty it will be an indication of fuel contamination, in this case the new elements will be obstructed in a short time of usage. Should this occur, an internal cleaning of the fuel reservoirs will be necessary.

4

Install in reverse order

5

Bleed the fuel system

AP47.00-B-1720-01B

Danger!

Risk of accidents caused by vehicle unintentional move when the engine is started. Risk of injury by pinching and burn by contact during the starting procedure or with the engine running

Assure vehicle against unintentional move. Utilize tight fitting and closed work clothes. Do not touch heated or running parts.

AS00.00-B-0005-01A

6

Start the engine and check the tightness of the fuel system

Do not run the starter continuously for more than 30 seconds. Should the engine not start within this interval, wait for approximately 1 minute to crank it again.

7

Shut down the engine.

Referenzierte Dokumente