Check propeller shaft for manufacturing date, replace propeller shaft if necessary (code: VS2DREIGE)

SM41.10-S-0016A

Check propeller shaft for manufacturing date, replace propeller shaft if necessary (code: VS2DREIGE)

15.06.2020

Model

447.603/703/813 #3 as of 560580 up to 567184 with engine 274

with code G42 (7G-TRONIC PLUS)

with code MM1 (Engine M274 DEH 20 LA 155 kW (211 hp) 5500 rpm)

Model

447.605/705/815 13 as of 558527 up to 562608 with engine 274

with code G42 (7G-TRONIC PLUS)

with code MM1 (Engine M274 DEH 20 LA 155 kW (211 hp) 5500 rpm)

Operation no. of the operation texts or standard texts and flat rates

Category

Op. no.

Operation text

Time

Acc. no.

Code

P

02 1612

Operations: Check manufacturing date of propeller shaft

-

41 901 66

VS2DREIGE

P

02 1613

Operations: Replace propeller shaft (after check)

-

41 901 66

VS2DREIGE

1

Propeller shaft

2

Adhesive label

3

Manufacturing date (example)

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A



Check

1

Check whether vehicle is affected by measure.

Affected vehicles: Check propeller shaft for manufacturing date, replace propeller shaft if necessary (code: VS2DREIGE)

SM41.10-S-0016-01AAA

 For authorized Mercedes­Benz service partners, only the entry in the Extended VEGA Application (EVA) system, in the "Current" tab, is decisive. An additional test of the affected vehicles in the workshop information system (WIS) or vehicle list is thereby not necessary.

2

Raise vehicle.



AR00.60-S-1000E

3

Check manufacturing date (3) of propeller shaft (1).

 The manufacturing date (3) of the propeller shaft (1) is on the adhesive label (2).

 The date entry "18/333" means: manufacturing date (3) of the propeller shaft (1) is calendar year 2018 on day 333.
The date entry "18/337" means: manufacturing date (3) of the propeller shaft (1) is calendar year 2018 on day 337.

If the manufacturing date (3) of the propeller shaft (1) is within the date range "18/333" to "18/337",



replace drive shaft (1).

 In this case, continue with operation step 4.

If the manufacturing date (3) of the propeller shaft (1) is outside the date range "18/333" to "18/337",



the vehicle is not affected by the measure and can be handed over to the customer.

 In this case, continue with operation step 5.

Replace

4

replace drive shaft (1).

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A



AR41.10-S-0050E

 Removal: Dispose of removed propeller shaft (1) properly. Observe the applicable legal requirements and specifications of the relevant country.

 Installation: Replace the four screws securing the flex disk to the transmission and the four screws securing the flex disk to the rear axle differential.

5

Lower vehicle.



AR00.60-S-1000E

Parts ordering note

Part no.

Designation

Quantity

A 447 410 21 00

Propeller shaft (on model 447.#03 #3)

n. B.

A 447 410 22 00

Propeller shaft (on model 447.#05 13)

n. B.

A 002 990 68 03

Screws (flex disk to transmission and flex disk to rear axle differential)

n. B.