Replace rear crossmember and retrofit reinforcements on rear crossmember

SM31.00-W-0044-02A

Replace rear crossmember and retrofit reinforcements on rear crossmember

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Model

963, 964

Code: SQT-RAH

 Frame

Number

Designation

Model 963, 964

BA31.30-N-1001-01D

Frame sections to frame

M10x1.5

Nm

80

M12x1.5

Nm

95

M14x1.5

Stage 1

Nm

150

Stage 2

°

90

M16x1.5

Stage 1

Nm

225

Stage 2

°

90

M18x1.5

Stage 1

Nm

330

Stage 2

°

90

 Frame

Number

Designation

Model 963, 964

BA31.30-N-1018-01D

Crossmember (rear) to frame

M16x1.5

Nm

225

1

Remove chock (5).

2

Remove holder (6) from chock (5).

3

Remove holder of compressed-air reservoir (4) with attached compressed-air reservoir (4) from rear crossmember (3).

 Do no remove compressed air lines from compressed-air reservoir (4). Place compressed-air reservoir (4) onto suitable surface.

4

Remove holder of compressed air reservoir (2) with attached compressed-air reservoir (2) from frame.

 Do no remove compressed air lines from compressed-air reservoir (2). Place compressed-air reservoir (2) onto suitable surface.

5

Remove bolts and rivets with which the rear crossmember (3) is attached to the frame.

6

Remove rear crossmember (3).

7

Install new rear crossmember (3), holder (6) for chock (5), holder for compressed-air reservoir (2) and the reinforcements (1)  .

8

Mount holder of compressed air reservoir (4) onto rear crossmember (3)  .

9

Install chock (5).