Operation no. of the operation texts or standard texts and flat rates | |||||
Category | Op. no. | Operation text | Time | Acc. no. | Code |
N | 028402 | Replace hose for engine intake air duct upstream of turbocharger | 1,0 h | 52 920 51 | LLS-ZETROS |
1 | Air intake hose |
2 | New spring bracket clamp (previously screw clamp) |
3 | Vent pipe |
4 | Bracket (ventilation pipe) |
5 | Turbocharger |
6 | Air cleaner housing |
W09.10-1048-06
W09.10-1047-09
1 | Air intake hose | 6 | Air cleaner housing | 8 | Hose | ||
5 | Turbocharger | 7 | Carrier (air filter housing) | 9 | Air intake pipe |
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Notes on self-locking nuts and bolts | ||
| Remove | ||
1 | Open engine hood and raise to vertical position | ||
| |||
2 | Unfasten previous screw clamp (2) on ventilation pipe (3) and remove air intake hose (1) | With regard to return shipment or scrapping of removed parts, please observe the information in your warranty system. | |
3 | Detach bracket (4) of ventilation pipe (3) from engine | ||
4 | Detach air intake pipe (9) from carrier (7) | ||
5 | Release hose (8) from air filter housing (6) and air intake pipe (9) | ||
6 | Release threaded connection of air filter housing (6) on carrier (7) | Do not release tensioning straps. | |
| Install | ||
7 | Slide new spring bracket clamp (2) onto ventilation pipe (3) | The new spring bracket clamp (2) replaces the previous screw clamp (2). | |
8 | Loosely insert new air intake hose (1) | ||
9 | Align all the parts of the air-intake area free of tension | The folds on the new air intake hose (1) must run as parallel as possible to each other. | |
10 | Screw air intake pipe (9) onto carrier (7) | ||
11 | Slide ventilation pipe (3) up to end stop in the new air intake hose (1) and fix in place using a new spring bracket clamp (2) | ||
12 | Tighten screw clamp of air intake hose (1) on turbocharger (5) and air intake pipe (9) | Check for parallel position to turbocharger (5) while doing so. | |
13 | Screw bracket (4) of ventilation pipe (3) onto engine | ||
14 | Tighten all screw clamps on the air intake pipe (9) and the hose (8) | ||
15 | Tighten threaded connection for air filter housing (6) on carrier (7) | ||
16 | Start engine and check air intake area for leaktightness | Visual inspection. | |
17 | Turn off engine | ||
18 | Close engine hood | ||
|
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ar8840w1000r
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører