Modification notes
P60.10-2038-11
For models 203 and 209 the Celette straightening bench 7203.300 was released.In order to be able to check the lift support points of the rear axle with the fuel tank installed and the rear axle removed, supplementary set 7203.309 is required for straightening bracket set 7203.300.
In the future, straightening bracket set 7203.310 must be ordered in any new orders. It consists of 7203.300 and 7203.309.
Supplementary set 7203.309 concerns picture item 58. It is constructed with MZ 080.
With engines 112 and 113, the following should be noted:
In the assembly plan, MZ 140 is specified for straightening tools 11 and 12.
These, however, are too high for V engines.
When positioning the overall vehicle on the Celette straightening bench, straightening tools 11 and 12 collide with the catalytic converter.
For this reason, MZ 140 must be replaced by MZ 080.
The assembly plan will be updated by the manufacturer of the straightening bracket set!
Parts ordering notes
Part no. | Designation | Quantity |
7203.300 | Celette straightening bracket set (model 203) | 1 |
7203.309 | Celette straightening bracket set (as a supplement to Celette straightening bracket set 7203.300) | 1 |
7203.310 | Celette straightening bracket set (model 203) (contains Celette straightening bracket sets 7203.300 and 7203.309) | 1 |