GF80.45-P-2004KA | Convenience closing/opening with lock switch, function | 16.2.98 |
MODEL 208.4
with CODE (491) U.S. version
with CODE (498) Japanese version
P72.29-2012-06
Networking
1 Transmitter key
A37 Pneumatic system equipment (PSE)
CAN Controller area network
M10/3 Left front power window motor
M10/4 Right front power window motor)
M10/5 Left rear power window motor
M10/6 Right rear power window motor
N52 Roll bar (RB)/ soft top operation control module
N69/1 Driver-side front door control module
N69/2 Driver-side front door control module
N70 Overhead control panel control module
N73 Electronic ignition switch (EIS) control module
S17/3 Left front door contact switch
S17/4 Right front door contact switch
S86/1 Left front lock switch
S88/2 Trunk lid lock switch
Function prerequisites:
no overvoltage/undervoltage
circuit 15_off and circuit 15R_off
all doors closed.
Convenience closing/opening on driver door with lock switch, function
When the left front lock switch (convenience) (S86/1) is actuated, the central locking function is triggered. Moreover, if the lock switch is pressed for longer than 5 seconds, the driver front door control module (N69/1) sends the convenience locking command to the CAN. The command is sent as long as the lock switch is operated.
-----------------------------------------------------------------------------------------
The door control modules execute the power window convenience closing function.
Convenience closing/opening with lock switch, trunk lid
In this case, the trunk lid lock switch (convenience) (S88/2) is actuated and the CAN command sent by the pneumatic system equipment (PSE), combination functions (A37).
When the "Unlock vehicle" button is pressed, the corresponding convenience opening functions are executed.
-----------------------------------------------------------------------------------------