GF80.30-P-4016A | Confirmation via turn signals, function | 12.7.99 |
MODEL 129, 140 as of 1.6.96,
210 (except 210.2) as of 1.6.96 up to 28.2.97 except CODE (491) US version
MODEL 170,
210.2 (except 210.281) up to 28.2.97 except CODE (491) US version
MODEL 210.072 up to 31.5.96 with CODE (491) US version
MODEL 202 (except 202.083) as of 1.8.96 up to 31.5.97 except CODE (491) USversion
MODEL 202.083 up to 31.5.97 except CODE (491) US version
Confirmation of the infrared remote control locked state is accomplished via the turn signals as well as via the receiver unit on the interior rearview mirror. The DAS infrared control module sends a ground signal to the combination relay or lock confirmation relay.
Lock confirmation, models 129/140
IR DAS control module (N54/1) Combination relay module (N10/2) Turn signals
Lock confirmation, models 170/202/210
IR DAS control module (N54/1) Lock confirmation relay (K54) Turn signals
When the hazard warning flasher system is switched on, confirmation via the turn signals is switched off by an additional lock confirmation relay Japan (K54/1) or the combination relay module (N10/2).
Lock confirmation, models 202/210
IR DAS control module (N54/1) Lock confirmation relay, Japan (K54/1) Lock confirmation relay (K54) Turn signals
Lock confirmation, models 129/140
IR DAS control module (N54/1) Combination relay (N10/2) Turn signals
Locking vehicle
Turn signals flash 3 times at a frequency of 1.5 Hz.
Unlocking vehicle
Turn signals flash once
If so desired by the customer, confirmation via the turn signals can be programmed out of the version coding with the hand-held tester.
When the vehicle is locked and unlocked manually with the lock cylinders in the driver's door or rear an unlocking or locking operation is also started.
In this case, the turn signals are not actuated.