gf7720p2003s

Open pop-up roof, function

Type gf · emne 77.20 · version 0102 · 2003-06-12

Gælder for: MODEL 215.3 MODEL 220.0 /1 with CODE (414a) Electric glass sliding/pop-up roof MODEL 220.0 /1 with CODE (491) USA version MODEL 220.075 /175 with CODE (498) Japanese version

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 77 Soltag, kaleche, opsats › 77.20 Soltag elektrisk — Serie 215 (modeller 3**) · Serie 220 (modeller 0**, 075, 1**, 175)

GF77.20-P-2003S

Open pop-up roof, function

13.3.98

MODEL 215.3

MODEL 220.0 /1 with CODE (414a) Electric glass sliding/pop-up roof

MODEL 220.0 /1 with CODE (491) USA version

MODEL 220.075 /175 with CODE (498) Japanese version

Function prerequisites

No overvoltage or undervoltage

Circuit ON or

Circuit 15 ON and

The overhead control panel control module (N70) recognizes the neutral position before switch is activated

(switch not actuated for longer than 40 ms)

Function

The pop-up roof is opened by pressing the SR switch (N70s1) upwards. The overhead control panel control module (N70) reads in the switch status and actuates the SR motor (M12m1) as long as the SR switch

(N70s1) is actuated, however, max. only 50 s (maximum activation time).

When the maximum activation time is exceeded reactuation is only possible if the overhead control panel control module (N70) recognizes the non-actuated state of the SR switch (N70s1).

The "Open pop-up roof" function is interrupted if the overhead control panel control module (N70) recognizes alock-upof the sliding/pop-up roof (SR) (M12).

When desynchronized, the "Open pop-up roof" function is restricted.

Automatic opening/closing of sliding/pop-up roof, function

GF77.20-P-2008S

Sliding/pop-up roof lock-up recognition, function

GF77.20-P-3000S

Desynchronize sliding/pop-up roof, function

GF77.20-P-3003S

Overhead control panel control module, location/purpose/design/function

GF82.20-P-4101S

Henviste dokumenter