Close sliding/pop-up roof, function

GF77.20-P-2002S

13.3.98

MODEL 215.3

MODEL 220.0 /1 with CODE (414a) Electric glass sliding/pop-up roof

MODEL 220.0 /1 with CODE (491) USA version

MODEL 220.075 /175 with CODE (498) Japanese version

Function prerequisites

 No overvoltage or undervoltage

 Circuit ON or

 Circuit 15 ON and

 The overhead control panel control module (N70) recognizes the neutral position before switch is activated

(switch not actuated for longer than 40 ms)

Function

The Close sliding/pop-up roof function is only available when the sliding/pop-up roof (SR) (M12) is in the synchronized state

It is triggered by pulling the SR switch (N70s1) downward. The overhead control panel control module (N70) then actuates the SR motor (M12m1)The direction in which the motor is actuated depends on whether the sliding roof or the pop-up roof is open. The SR motor (M12m1) is actuated as long as the SR switch (N70s1) is pressed, however, max. only 50 s (maximum activation time). The Close sliding/pop-up roof function is interrupted if lock-up or obstruction of the sliding/pop-up roof (SR) (M12) is recognized.

	Automatic opening/closing of sliding/pop-up roof, function		GF77.20-P-2008S
	Open pop-up roof, function		GF77.20-P-2003S
	Open sliding roof, function		GF77.20-P-2004S
	Sliding/pop-up roof lock-up recognition, function		GF77.20-P-3000S
	Sliding/pop-up roof obstruction sensor, function		GF77.20-P-3004S
	Synchronize sliding/pop-up roof, function		GF77.20-P-3002S
	Sliding/pop-up roof, location/purpose/design/		GF77.20-P-4100S
	Overhead control panel control module, location/purpose/design/function		GF82.20-P-4101S

Henviste dokumenter