ar9710p4000k

Seam sealing following repair

Type ar · emne 97.10 · version 0105 · 2002-11-15

Gælder for: MODEL 208.3

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 97 Karrosseritætning, korrosionsbeskyttelse › 97.10 Karrosseritætning — Serie 208 (modeller 3**)

EinPAS 40 Konservering/lakering › 40.20 Korrosionsbeskyttelse › 40.20.30 Fugetætning — Serie 208 (modeller 3**)

AR97.10-P-4000K

Seam sealing following repair

19.2.97

MODEL 208.3

Figure item, etc.

Work instructions

Danger!

Vapors and gases from the solvent represent an explosion and poisoning hazard. Injury hazard to skin and eyes when working on corrosion protection agents.

Do not spray corrosion protection agent into open flames or flowing bodies and keep away from fire. Process in well-ventilated rooms, wear respiratory protection.

AS97.00-Z-0001-01A

Corrosion protection

Remove chips; prime welding seams, etc. first. Do not apply sealant on bare sheet metal.

Hollow cavity preservation

AR97.20-P-1500K

Underbody preservation

AH97.20-P-2000-01A

Sealing

After repairs on the body seal spot welds and rivets on both sides

The body connection points can require various additional sealing measures in some cases depending on the scope of repair.

Processing instructions

AR97.10-P-0500-02A

Service Information sprayable seam seal

SI97.10-P-0001A

Seam sealing following repair

Front end damage

AR97.10-P-4000-01K

Rear end damage

AR97.10-P-4000-02K

Side damage

AR97.10-P-4000-03K

Detachable body components

When replacing detachable body components such as doors, etc. also seal seams and beads.

AR97.10-P-4000-04K

Henviste dokumenter