P97.20-0235-06
1 Engine hood
2 Front door-rubber retaining rail
3 Door channel, front door
4 Trunk lid
P97.20-0236-09
5 Cross member below windbreak
6 Longitudinal member, front left
7 Air/water channel
8 Cross member, front
P97.20-0237-09
9 Longitudinal member, outer front right
10 Connecting carrier, front right
11 Engine support
12 Consoles transverse link bearing
13 Cross member below pedal floor panel
14 Longitudinal member, outer rear right
P97.20-2001-09
15 A-pillars
16 Tunnel reinforcement
17 Wheel house passenger compartment
18 Cross member rear axle
19 Assembly mounting
20 Mounting diagonal struts on spare wheel recess
(model 208.4 only)
P97.20-2002-06
model 208.4 only
21 Rear window channel
22 Longitudinal member, lateral, inner
Fig. item, etc. | Work instructions | ||
Danger! | Risk of explosion and poisoning through solvent vapors and gases. Risk of injury to eyes and skin when handling anti-corrosion agents | Do not spray anti-corrosion agent into flames or onto glowing-hot surfaces and keep away from ignition sources. Work only in well ventilated areas, wear protective respiratory mask. | |
| Notes on hollow cavity preservation | ||
Processing instructions for hollow cavity preservation | |||
| Apply wax preservative on hatched areas only after sealing and painting work, but before assembly work. | Insert spray hose as far as possible into cavities and pull out slowly during spraying. | |
Spray hose must be stiff and jets must spray inclined to front and rear. Cavities must be dry. | |||
| Carry out repair preservation twice in succession after a flash-off time of 5 minutes. | Application temperature must not be below +15 °C. Apart from the standard cavity preservation as shown, additional sealing measures may be required depending on area of repair. |
Henviste dokumenter
- ah9720p000101b Oplysninger om hulrumskonservering
- ap9720p064001a Bearbejdningsoplysninger i forbindelse med hulrumskonservering
- as9700z000101a Eksplosionsfare og fare for forgiftning på grund af opløsningsmiddeldampe og gasser. Fare for personskade på øjne og hud ved bearbejdning af rustbeskyttelsesmiddel