ar9160s0720p

Remove/install seat occupancy recognition sensor

Type ar · emne 91.60 · version 0100 · 2019-06-27

Gælder for: Model 470, 471

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 91 Sæder, køjer, selestrammere › 91.60 Airbag, fodgængerbeskyttelse — Serie 470 · Serie 471

EinPAS 27 Passive sikkerhedssystemer › 27.16 Airbag › 27.16.12 Sensor/kontakt/ledningssæt — Serie 470 · Serie 471

EinPAS 27 Passive sikkerhedssystemer › 27.17 Sikkerhedssystem › 27.17.12 Sensor/kontakt/ledningssæt — Serie 470 · Serie 471

AR91.60-S-0720P

Remove/install seat occupancy recognition sensor

25.06.2019

Model

470, 471

Remove/install seat occupancy recognition sensor

1

Seat cushion padding

2

Seat occupancy recognition

S91.60-A014-11

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Remove seat cushion padding (1) from front passenger seat.


Model 470, 471 except code H15 (Seat heating for front passenger)

AR91.10-S-5040P

Model 470, 471
with code H15 (Seat heater for front passenger)

AR91.10-S-5040PA

2

Carefully remove seat occupancy recognition (2) from seat cushion padding (1).

Seat occupancy recognition (2) is bonded to the seat cushion padding (1).

Installation: Check seat cushion padding (1) for damage.
Place new seat occupancy recognition (2) on seat cushion padding (1) at same position as removed part and glue on.

If seat cushion padding (1) is damaged,

Install new seat cushion padding (1).

3

Install in the reverse order.

Henviste dokumenter