Shown on right front seat (2) |
2 | Front seat |
3 | Electrical connector |
4 | Electrical wiring harness |
S91.40-4642-11
S91.40-4643-78
Shown on right front seat (2) |
1 | Seat belt buckle | 4 | Electrical wiring harness | 6 | Cover | ||
2 | Front seat | 5 | Nut |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Remove inner trim from seat frame of respective front seat (2). | ||
2 | Remove front seat (2) from vehicle floor and tilt backward with electric lines connected until electrical connector (3) is accessible. | ||
Do not disconnect ground line from on-board electrical system battery. | |||
3 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m). | ||
4 | Disconnect electrical connector (3). | ||
5 | Remove electrical wiring harness (4) from front seat (2). | ||
6 | Remove nut (5). | Nut, seat belt buckle to front seat | |
7 | Thread seat belt buckle (1) through cover (6) and remove. | ||
8 | Install in the reverse order. | ||
| Check | ||
9 | Carry out function test of seat belt buckle (1). |
Henviste dokumenter
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen
- ar9110s1000p
- ar9110s1202p