ar9140p1515v

Remove/install belt buckle (front seat)

Type ar · emne 91.40 · version 0100 · 2006-07-25

Gælder for: MODEL 171.4

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 91 Sæder, køjer, selestrammere › 91.40 Sikkerhedsseler, selestrammere — Serie 171 (modeller 4**)

EinPAS 27 Passive sikkerhedssystemer › 27.17 Sikkerhedssystem › 27.17.20 sikkerhedssele/selelås/selestrammer — Serie 171 (modeller 4**)

AR91.40-P-1515V

Remove/install belt buckle (front seat)

6.10.03

MODEL 171.4

Remove/install belt buckle (front seat)

P91.40-2475-09

1 Seat belt buckle

2 Plug assembly

3 Bracket

4 Electrical connector

R46 Driver buckle ETR squib

R46/1 Front passenger buckle ETR squib

5 Tie strap

6 Wiring harness

7 Screw

8 Electrical connector

Remove/Install

Danger!

Risk of injury. Injuries may result when performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag unit with deployment face up, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Instructions for performing repair, body work and welding on vehicles with airbags and ETR units

AH91.00-P-0002-01M

Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

Legal regulations on handling and storing airbags and emergency tensioning retractors

AH91.00-P-0004-01A

1

Remove left or right front seat

AR91.10-P-1000V

2

Place front seat to the rear on the front seat backrest

When putting down use a suitable protective surface, as otherwise the paint on the backrest frame may be damaged.

3

Remove plug assembly (2) using suitable screwdriver on bracket (3)

4

Unlock and detach electrical connector (4) using suitable screwdriver on plug assembly (2)

5

Expose wiring harness (6)

Note correct installation positions.

6

Remove tie straps (5) and detach electrical connector (8) on the driver buckle ETR squib (R46) or the front passenger buckle ETR squib (R46/1)

Installation: Replace tie straps (5).

7

Undo bolt (7) on seat belt buckle (1) and remove seat belt buckle (1)

*BA91.40-P-1003-01A

If the seat belt buckle (1) is replaced, then the faulty seat belt buckle (1) must be disposed of properly:

Notes on disposing of airbag and emergency tensioning retractor units

OS91.00-P-0001-01A

8

Install in the reverse order

9

Read out DTC memory

Connect STAR DIAGNOSIS, interrogate fault memory

AD00.00-P-2000-04A

Diagnosis system STAR DIAGNOSIS

*WH58.30-Z-1048-13A

Seat belts/emergency tensioning retractors

Number

Designation

Model
171

BA91.40-P-1003-01A

Bolt/nut on front seat belt buckle

Nm

30

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

Henviste dokumenter