Remove/install rear seat belts

AR91.40-P-0681ECA

Remove/install rear seat belts

17.12.09

 

Remove/install

 Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

 Danger!

Risk of injury caused by release of spring in the automatic belt retractor is released.

Never disassemble automatic belt retractors.

AS91.00-Z-0002-01A

 Danger!

Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A



Notes on performing repair, body work and welding on vehicles with airbags and ETR units

AH91.00-P-0002-01M



Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A



Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

1

Open soft top

2

Open soft top compartment cover

3

Switch off ignition and remove transmitter key or KEYLESS-GO start/stop button from electronic ignition lock control unit

 KEYLESS-GO start/stop button only with code (889) Keyless-Go

4

Disconnect battery ground line

AR54.10-P-0003EW

5

Remove rear seat backrest

AR91.12-P-1620EA

6

Remove screw/bolt (11) and remove bracket (5)

7

Remove screw/bolt (6) at guide fitting (7)



*BA91.40-P-1014-01P

8

Unclip belt guide (8)

 Press catch hook (arrow A), remove belt guide (8) by means of pivoting movement (arrow B).

9

Disconnect left rear emergency tensioning retractor squib electrical connector (X28/47) at left rear emergency tensioning retractor squib (R12/6) or right rear emergency tensioning retractor squib electrical connector (X28/48) at right rear emergency tensioning retractor squib (R12/7)

10

Remove screw/bolt (9) at automatic belt retractor (4)



*BA91.40-P-1013-01P

11

Remove seat belt (1) with automatic belt retractor (4)

Installation: Insert and position automatic belt retractor (4) in guide (7).

 If the automatic belt retractor (4) is replaced, the faulty automatic belt retractor (4) must be disposed of properly. Refer to: 



Notes on disposing of airbag and emergency tensioning retractor units

OS91.00-P-0001-01A

12

Install in the reverse order

13

Check supplemental restraint system (SRS) with STAR DIAGNOSIS

After replacing the automatic belt retractors (4) with seat belt (1).



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Number

Designation

Model
207

BA91.40-P-1013-01P

Bolt to rear inertia reel

Nm

35

BA91.40-P-1014-01P

Screw/bolt, rear belt guide bracket to rear panel

Nm

35