Remove/install armrest at rear seat backrest

AR91.12-P-1745LFA

Remove/install armrest at rear seat backrest

02.10.2019

Model

222.0/1/9

with code 223 (Electric backrest adjustment and head restraints)

1

Armrest

4

Screw

7

Screw

2

Trim piece

5

Screw

8

Stowage tray

3

Rear center seat cushion

6

Cover

9

Wiring harnesses

 

Remove/install

1

Remove both rear backrests

Model 222.0/1/9
with code 223 (Electric backrest adjustment and head restraints)

AR91.12-P-1620LFA

2

Remove trim piece (2) at rear on rear seat

AR68.30-P-1460LF

3

Fold out the armrest (1)

4

Open inside cover of the armrest (1)

5

Unclip stowage tray (8) in area of arrows using an assembly wedge, then remove and turn over

 Mounting wedge

*110589035900

6

Disconnect electrical connectors from electrical wiring harnesses (9)

 The number of electric wiring harnesses (9) can vary depending on the equipment installed.

7

Unfasten electrical wiring harnesses (9) from stowage tray (8) bracket

8

Remove bolts (5)

9

Remove cover (6)

10

Close inside cover of the armrest (1)

11

Fold in armrest (1)

12

Remove bolts (7)

13

Remove screws/bolts (4)

14

Unclip rear center seat cushion (3) and remove

15

Pull armrest (1) forward until the electrical wiring harnesses (9) can be taken out of the armrest (1)

16

Remove electrical wiring harnesses (9) from the armrest (1)

 The number of electric wiring harnesses (9) can differ depending on the equipment installed.

17

Remove armrest (1)


Carefully remove armrest (1) from the vehicle.
Otherwise components in vehicle interior or at rear doors could become damaged.

18

Install in the reverse order