Shown with code 223 (Electrically adjustable rear bench seat) |
1 | Trim piece |
1.1 | Seat belt guide |
2 | Trim piece |
2.1 | Seat belt guide |
3 | Trim piece |
3.1 | Seat belt guide |
4 | Interior lamp |
5 | Optical fiber |
P68.30-3701-06
P68.30-3713-09
Shown with code 223 (Electrically adjustable rear bench seat) |
2 | Trim piece | 6 | Screw | |
4 | Interior lamp | 7 | Hole | |
5 | Optical fiber | 8 | Pin |
Shown with code 224 (First class, rear) |
9 | Screw |
10 | Trim piece |
11 | Trim piece |
P68.30-3716-06
| Remove/install | ||
1 | Move backrest to front-most position | ||
2 | Unclip belt guides (1.1, 2.1 and 3.1) | Belt guides (1.1, 2.1 and 3.1) are clipped at side and bottom. | |
3 | Unclip trim strip (1) and disconnect interior lamp (4) from optical fiber (5) | ||
4 | Unclip trim strip (3) and disconnect interior lamp (4) from optical fiber (5) | ||
5 | Remove screw/bolts (6) | ||
6 | Unclip trim strip (2) and disconnect interior lamp (4) from optical fiber (5) | Model 222.0/1/9 | |
Installation: Observe position of pins (8) on optical fiber (5) in relation to hole (7) on interior lamp (4). | |||
7 | Open cover on top rear center console | Model 222.1/9 | |
8 | Remove screw/bolts (9) | Model 222.1/9 | |
9 | Unclip trim piece (10) at top and disconnect interior lamp (4) from optical fiber (5) | Model 222.1/9 | |
Installation: Observe position of pins (8) on optical fiber (5) in relation to hole (7) on interior lamp (4). | |||
10 | Unclip trim piece (11) at top and disconnect interior lamp (4) from optical fiber (5) | Model 222.1/9 | |
Installation: Observe position of pins (8) on optical fiber (5) in relation to hole (7) on interior lamp (4). | |||
11 | Transfer optical fiber (5) | When replacing trim piece (1, 2, 3, 10, 11). | |
12 | Install in the reverse order |