Remove/install folding rear seat

AR91.12-P-1720LW

Remove/install folding rear seat

28.02.2019

Model

205.0/1, 213.0

with code 287 (Folding seat backrests in rear passenger compartment)

Model

205.2/3

Model

213.2

Model

253 (except 253.992/993), 293

1

Right backrest

8

Hinge

14

Locking plate

2

Center backrest

9

Bolts

15

Locking plate

3

Left backrest

10

Hinge

S54/5

Left rear backrest inclination switch

4

Belt end fitting

11

Spacer ring

S54/6

Right rear backrest inclination switch

5

Left seat belt buckle

12

Hinge

X77/1

Left rear backrest release actuator electrical connector

6

Screw

13

Screw

X77/2

Right rear backrest release actuator electrical connector

7

Screw

Shown on model 205.1 with code 872 (Seat heating in rear passenger compartment)

X54/39

Left rear backrest heater pad electrical connector

X54/40

Right rear backrest heater pad electrical connector

 

Remove/install

1.1

Remove left and right seat side bolster.

Model 205.0/1, 213.0
with code 287 (Folding seat backrests in rear passenger compartment)
Model 205.2/3
Model 213.2

Model 205.0/1, 213.0
with code 287 (Folding seat backrests in rear passenger compartment)
Model 205.2/3

AR91.12-P-1710LW

Model 213.2

AR91.12-P-1711LWT

1.2

Remove rear passenger compartment seat cushion.

Model 253 (except 253.992/993), 293

AR91.12-P-1020LW

2

Move driver seat and front passenger seat to foremost position.

3

Disconnect and unclip electrical connector of rear passenger compartment seat backrest heater pad (X54/39, X54/40).

Model 205.1, 213.0
with code 287 (Folding seat backrests in rear passenger compartment)
with code 872 (Heated rear seats)
Model 213.2, 253 (except 253.992/993), 293
with code 872 (Heated rear seats)

4

Release right seat backrest (1), center seat backrest (2) and left seat backrest (3) and fold forward.

5

Disconnect electrical connector at right rear passenger compartment seat backrest inclination switch (S54/6) and take electrical wiring harness out of working area.

6

Disconnect electrical connector for rear passenger compartment seat backrest release actuator (X77/2, X77/1).

Model 205.2, 253 (except 253.992/993), 293

7

Fold back left seat backrest (3).

8

Unscrew bolt (7).

 Bolt, outer pivot bearing to body

*BA91.12-P-1003-03M

9

Remove lock washer (14).

Model 205.2/3, 213.2
Model 253 (except 253.992/993), 293

 Installation: Replace lock washer (14).

10

Pull right seat backrest (1) off center seat backrest (2) and remove.


Do not tilt right backrest (1).
Otherwise, the spacer ring in the right seat backrest (1) may be damaged.

11

Remove screws (9) at pivot bearing (10) of center seat backrest (2).

 Model 253.953/954
The pivot bearing (10) is only connected with one screw/bolt (9) at the crossbar.

 Bolt, center pivot bearing to body

*BA91.12-P-1004-03M

12

Guide pivot bearing (10) out of crossbar and from center seat backrest (2) at same time.

Model 253.953/954


Do not tilt pivot bearing (10).
Otherwise, the spacer ring (11) in the pivot bearing (10) may be damaged.

13

Detach center seat backrest (2) from left seat backrest (3) and remove.


Do not tilt center seat backrest (2).
Otherwise the spacer ring in the center seat backrest (2) could be damaged.

14

Remove screw (6), place left seat belt buckle (5) to one side and guide seat belt end fitting (4) upward.

Model 205.0/1, 213.0
with code 287 (Folding seat backrests in rear passenger compartment)
Model 205.2, 213.2, 253 (except 253.992/993), 293

 Installation: Ensure correct installation position.

 Bolt, rear seat belt buckle

*BA91.40-P-1009-01U

15

Release left seat backrest (3) and fold forwards.


When removing the left seat backrest (3), always start with the right seat backrest (1) and then remove the center seat backrest (2).
Otherwise, the spacer ring (11) in the pivot bearing (10) of the left seat backrest (3) may be damaged.

16

Remove screws (9) from pivot bearing (10) of left seat backrest (3).

 Bolt, center pivot bearing to body

*BA91.12-P-1004-03M

17

Remove bolt (13).

 Bolt, outer pivot bearing to body

*BA91.12-P-1003-03M

18

Remove lock washer (15).

Model 205.2/3, 213.2
Model 253 (except 253.992/993), 293

 Installation: Replace lock washer (15).

19

Disconnect electrical connector at left rear passenger compartment seat backrest inclination switch (S54/5) and take electrical wiring harness out of working area.

20

Remove left seat backrest (3).


Do not tilt the pivot bearings (10, 12).
Otherwise, the spacer ring in the left seat backrest (3) and the spacer ring (11) in the pivot bearing (10) may be damaged.

21

Install in the reverse order

 Rear seats

Number

Designation

Model 205.0

Model 205.1

BA91.12-P-1003-03M

Bolt, outer pivot bearing to body

Nm

40

40

 Rear seats

Number

Designation

Model 205.2

Model 205.3

BA91.12-P-1003-03M

Bolt, outer pivot bearing to body

Nm

40

40

 Rear seats

Number

Designation

Model 213.0

Model 213.2

BA91.12-P-1003-03M

Bolt, outer pivot bearing to body

Nm

40

40

 Rear seats

Number

Designation

Model 253

Model 293

BA91.12-P-1003-03M

Bolt, outer pivot bearing to body

Nm

40

40

 Rear seats

Number

Designation

Model 205.0

Model 205.1

BA91.12-P-1004-03M

Bolt, center pivot bearing to body

Nm

40

40

 Rear seats

Number

Designation

Model 205.2

Model 205.3

BA91.12-P-1004-03M

Bolt, center pivot bearing to body

Nm

40

40

 Rear seats

Number

Designation

Model 213.0

Model 213.2

BA91.12-P-1004-03M

Bolt, center pivot bearing to body

Nm

40

40

 Rear seats

Number

Designation

Model 253

Model 293

BA91.12-P-1004-03M

Bolt, center pivot bearing to body

Nm

40

40

 Seat belts/emergency tensioning retractors

Number

Designation

Model 205.0

Model 205.1

BA91.40-P-1009-01U

Bolt, rear seat belt buckle

Nm

35

35

 Seat belts/emergency tensioning retractors

Number

Designation

Model 205.2

Model 213

BA91.40-P-1009-01U

Bolt, rear seat belt buckle

Nm

35

35

 Seat belts/emergency tensioning retractors

Number

Designation

Model 253

Model 293

BA91.40-P-1009-01U

Bolt, rear seat belt buckle

Nm

35

30