Remove/install front seat backrest seat-back lining

AR91.10-P-1910LF

Remove/install front seat backrest seat-back lining

27.11.2018

Model

217

Model

222

Shown on model 222

1

Seat-back lining

3

Screw

6

Guide

2

Seat backrest

4

Bracket

7

Backrest frame



Remove

1

Release front seat and tilt with connected electrical lines.

AR91.10-P-1000LF


Release and tilt front seat.
Otherwise, the center console may be damaged.

2

Remove screws (3) under seat backrest frame (7).

3

Unhook left and right holder (4) from respective guide (6).

 Press seat-back lining (1) at level of holders (4) slightly inward and slide toward front. Pull seat-back lining (1) outward until holders (4) can be unhooked from guides (6).

4

Pull seat-back lining (1) downward and remove.



Install

5

Position seat-back lining (1) and secure to seat backrest (2).


Handle the seat-back lining (1) with care.
Otherwise, the contact areas of the seat-back lining (1) and trim parts of the seat may be damaged.

 Position the seat-back lining (1) at an angle, push against the front seat and insert the guides (arrows A) on the right and left in sequence by turning the seat-back lining (1) back and forth into the backrest frame (7). When doing so, spread seat-back lining (1) slightly outward at bottom and guide holders (4) into guides (6).

6

Tighten screws (3) below at seat backrest frame (7).

7

Install front seat.

AR91.10-P-1000LF