Remove/install front seat

AR91.10-P-1000LF

Remove/install front seat

25.04.2018

Model

217

Model

222

Modification notes

15.07.2016

Adjustment of seat cushion changed.

Step 4

Shown on model 222

1

Front seat

3

Screw

5

Screw

2

Cover

4

Cover

6

Belt end fitting

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Move head restraint down

2

Move steering column all the way forward and all the way up

When removing the front seat (1) on the driver side.

3

Move front seat (1) backwards and all the way to top

4

Extend the seat cushion by approx. 20 mm

5

Unclip cover (2) on guide rails

6

Remove screws/bolts (3) from guide rails

 Bolt, front seat to vehicle floor

*BA91.10-P-1001-01S

7

Adjust front seat (1) to front

8

Disconnect belt end fitting (6)

Model 222

AR91.40-P-1030-02LF

9

Unclip covers (4) on guide rails

10

Remove screws/bolts (5) from guide rails

 Bolt, front seat to vehicle floor

*BA91.10-P-1001-01S

11

Move front seat (1) to center position

12

Open soft top

Model 217.4

13

Detach ground line of on-board electrical system battery

AR54.10-P-0003LF

14

Tilt back front seat (1)

15

Disconnect electrical connectors at bottom at front seat (1) and place to one side with electrical wiring harness

 The number of electrical connectors depends on the equipment installed.

16

Disconnect pneumatic line from bottom of front seat (1)

Model 217
with code 432 (Left and right dynamic multicontour seat)
Model 222
with code 432 (Left and right dynamic multicontour seat)

17.1

Cover up center console and door sill

When removing the front seat (1) on the passenger side.



000 588 08 98 00 Cover

WS98.00-P-0014B

 Cover door sill and door sill molding with door sill protector.

17.2

Cover center console, door sill and steering wheel

When removing the front seat (1) on the driver side.



000 588 08 98 00 Cover

WS98.00-P-0014B

 Cover door sill and door sill molding with door sill protector.

18

Remove front seat (1) from the vehicle through the door cutout for the front door


Carefully remove front seat (1) from vehicle.
Otherwise adjacent components may be damaged.

 Helper required.

 Installation: Check that the lock pin for the guide rail is correctly seated in the vehicle floor.

19

Install in the reverse order

 Front seats

Number

Designation

Model 217

Model 222

BA91.10-P-1001-01S

Bolt, front seat to vehicle floor

Nm

50

50