Remove/install windshield wiper linkage cover

Type ar · emne 88.80 · version 0102 · 2005-07-12

Gælder for: MODEL NMB613.355 /358 /388 /455 /485

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 88 Monteringsdele, udvendige klapper › 88.80 Afdækningslister — Serie 613 (modeller 355, 358, 388, 455, 485)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.38 kofanger/spoiler/beklædning udvendig/opbevaringsboks/frontbeskyttelse › 35.38.44 beklædning/liste/frontbeskyttelse — Serie 613 (modeller 355, 358, 388, 455, 485)

AR88.80-T-5100B

Remove/install windshield wiper linkage cover

31.3.00

MODEL NMB613.355 /358 /388 /455 /485

Remove/install windshield wiper linkage cover

T88.80-0014-06

1 Spare wheel cover

2 Bolt

4 Retaining clamp

5 Bracket

 	Remove/install
1	Open spare wheel cover (1)	 See Operating Instructions
2	Reach through spare wheel cover and unscrew bolts (2)
3	Slightly pull linkage cover of windshield toward outside at bottom edge until it comes out of side retaining clamps (4)
4	Pull linkage cover of windshield out of brackets (5) downward	 Installation: Ensure that passage is seated properly.
5	Install in the reverse order