Remove/install windshield wiper linkage cover

Type ar · topic 88.80 · version 0102 · 2005-07-12

Applies to: MODEL NMB613.355 /358 /388 /455 /485

Where it sits

Function group 3 Body › 88 Detachable body components, exterior flaps › 88.80 Cover strips — Series 613 (models 355, 358, 388, 455, 485)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.44 Trim/trim element/front protective paneling — Series 613 (models 355, 358, 388, 455, 485)

AR88.80-T-5100B

Remove/install windshield wiper linkage cover

31.3.00

MODEL NMB613.355 /358 /388 /455 /485

Remove/install windshield wiper linkage cover

T88.80-0014-06

1 Spare wheel cover

2 Bolt

4 Retaining clamp

5 Bracket

 	Remove/install
1	Open spare wheel cover (1)	 See Operating Instructions
2	Reach through spare wheel cover and unscrew bolts (2)
3	Slightly pull linkage cover of windshield toward outside at bottom edge until it comes out of side retaining clamps (4)
4	Pull linkage cover of windshield out of brackets (5) downward	 Installation: Ensure that passage is seated properly.
5	Install in the reverse order