P88.40-2564-06
1 Bolts
2 Catch tabs
3 Front bumper
4 Radiator grille
Modification notes
| Removing | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Open engine hood | ||
2 | Remove bolts (1) | ||
3 | Remove expansion rivets and cover from radiator crossmember | As of model year 2011. | |
4 | Release radiator grille (4) | Push catch lugs (2) upward using a suitable tool. | |
5 | Push lower area of radiator grille (4) toward rear and remove | ||
| Install | ||
6 | Install radiator grille (4) in front bumper (3) | Press radiator grille (4) toward front. | |
The catch lugs (2) should catch audibly in radiator grille (4). | |||
7 | Install bolts (1) | Adjust gap between engine hood and radiator grille (4) and front bumper (3) and radiator grille (4) and tighten bolts (1). | |
See: | |||
Gap dimensions on hoods, doors and lids | |||
Gap between engine hood and front grille/bumper and front grille "Dimension E" | |||
Feeler gauge | |||
8 | Close engine hood |
Test and adjustment values for gap dimensions
Number | Designation | Model 251 | |||
BE60.00-P-1001-01S | Gap dimension | Lamp unit to engine hood | Dimension "A" | mm | 4 (1) |
Lamp unit to fender | Dimension "B" | mm | 4 (1) | ||
Lamp unit to bumper | Dimension "C" | mm | 4 (1) | ||
Engine hood to bumper | Dimension "D" | mm | 6 (1) | ||
Engine hood to front grille/bumper to front grille | Dimension "E" | mm | 7 (1) | ||
See picture | - | ||||
Feeler gauge
129 589 03 21 00
Henviste dokumenter
- ar6000p070001rt
- ar8840p1000rt
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.