P88.40-2222-09
Shown on model 463.248 |
1 | Fuse | 4 | Spray nozzle | 7 | Electrical wiring harness | ||
2 | Telescopic damper | 5 | Hose couplings | 8 | Feed-through grommets | ||
3 | Electrical connectors | 6 | Hose |
Shown on model 463.248 |
9 | Mounting clamps |
10 | Ground cable |
11 | Bolts |
P88.40-2224-06
Shown on model 461.302 |
9 | Mounting clamps |
10 | Ground cable |
11 | Bolts |
12 | Check valve |
P88.40-2356-06
Shown on model 461.331 |
11 | Bolts |
13 | Check strap |
P88.40-2551-06
Danger | Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. | |
| Remove/install | ||
1 | Open engine hood and position upright. | Model 461.302/304/305/331/332/333/334/340/342/343/344/345/346/392 | |
Model 461.302/304/305/331/332/333/334/340/342/343/344/345/346/392 | |||
2 | Remove radiator grille. |
| |
Model 463.202/236/237/346 | |||
Installation: Install radiator trim only after adjusting engine hood. If locking mechanism jams, hood lock can thus be manually actuated. | |||
3 | Release and disconnect electrical connectors (3) at spray nozzles (4). | Model 463.202/236/237/346 | |
4.1 | Remove hose couplings (5) from spray nozzles (4). | Model 463.202/236/237/346 | |
4.2 | Remove hose (6) from check valve (12). | Model 461.302/304/305/331/332/333/334/340/342/343/344/345/346/392 | |
5.1 | Remove hose (6) and electrical wiring harness (7) together with feed-through grommets (8) from hood. | Model 463.202/236/237/346 | |
5.2 | Pull hose (6) out of mounting clamps (9). | Model 461.302/304/305/331/332/333/334/340/342/343/344/345/346/392 | |
6 | Check feed-through grommets (8) for damage. | If there are problems, | |
| |||
Replace feed-through grommets (8). | |||
7 | Remove ground line (10). | M61 | |
8 | Remove check strap (13) from hood. | Model 461.331/392 | |
9 | Remove screws (11). | Installation: | |
Bolt, engine hood hinge to engine hood | |||
10 | Remove hood. | Helper required. | |
11 | Set down hood on suitable base. | Helper required. | |
12 | Remove telescopic shock absorber (2). | When replacing hood. | |
13 | Remove ball head of telescopic shock absorber (2). | When replacing hood. | |
14 | Remove spray nozzles (4). | When replacing hood. | |
15 | Remove insulation mat of hood. | When replacing hood. | |
16 | Install in the reverse order. | ||
Adjust | |||
17 | Adjust hood. | Adjust uniform gap dimension all the way around. | |
Engine hood should catch with low resistance. | |||
18 | Install radiator grille. |
| |
Model 463.202/236/237/346 | |||
| Check | ||
19 | Perform function test of spray nozzles (4). | If there are problems, | |
| |||
Adjust spray nozzles (4). |
Henviste dokumenter
- ar8800p2115gl
- ar8800p2115gm
- ar8800p2115gm
- ar8840p1000gg
- ar8840p1000gg
- as8235z000101a Brandfare og fare for eksplosion pga. antændelse af sprinklervæske og frostbeskyttelsesmiddel og dampe fra disse. Fare for forgiftning pga. indtagelse af sprinklervæske og frostbeskyttelsesmiddel og indånding af dampe fra disse.