1 | Engine air intake duct |
2 | Cold air intake |
3 | Carrier |
4 | Screw |
5 | Headlamp |
6 | Bolts |
7 | Screw |
8 | Screw |
P88.20-4010-06
9 | Adjusting aid |
10 | Engine hood |
P88.20-4011-06
| Remove | ||
1 | Remove front bumper | ||
2 | Remove engine air intake duct (1) | ||
3 | Detach cold air intake (2) and fold toward rear | ||
4 | Detach headlamp (5) | ||
To do this, unscrew bolts (4). | |||
Detach headlamp (5) until screws (6) are accessible. | |||
5 | Remove screw/bolts (6) | ||
6 | Remove screw/bolt (7) | ||
7 | Loosen bolt (8) | ||
8 | Remove carrier (3) | ||
| Install | ||
9 | Install carrier (3) | Only position bolts (6, 7, 8), do not tighten. | |
10 | Pull adjustment aid (9) upward and turn clockwise 180° (arrow) until adjustment aid (9) arrests | ||
11 | Close engine hood (10) | ||
12 | Lift carrier (3) until adjustment aid (9) makes contact with engine hood (10) | ||
13 | Tighten bolts (6, 7, 8) | ||
14 | Open engine hood (10) | ||
15 | Turn adjustment back (9) and arrest in carrier (3) | ||
16 | Install cold air intake (2) | ||
17 | Install engine intake air duct (1) | ||
18 | Fasten headlamp (5) | ||
19 | Install front bumper |
Henviste dokumenter
- ar8210p4730ewm Af-, påmontering af lygteenhed
- ar8820p2000ewm