D88.20-1112-09
Shown on model 906.7 with code (EZ8) Parktronic system (PTS)
1 Bumper
2 Bumper corner
3 Collar bolts
4 Rear protective strip
5 Clips
X35/28 Rear bumper PTS connector (with code (EZ8) Parktronic system (PTS))
6 Bumper corner upper section
7 Cable tie (with code (EZ8) Parktronic system (PTS))
8 Clip
| Remove/install | ||
1 | Remove left and right rear protective strip (4) | ||
2 | Remove clips (5) from bumper corners (2) | ||
3 | Loosen left and right bumper corner | Installation: Check condition of mounting clips, replace if necessary. | |
Long wedge | |||
4 | Remove clips (8) at bottom from bumper (1). | ||
5 | Open cable ties (7) | With code (EZ8) Parktronic system (PTS) | |
6 | Disconnect PTS, rear bumper connector (X35/28) | With code (EZ8) Parktronic system (PTS) | |
7 | Open rear-end doors | ||
8 | Unscrew collar screws (3) | | |
9 | Remove bumper (1) together with bumper corners (2) | ||
10 | Install in the reverse order |
Bumper
Number | Designation | Model | Model | ||
BA88.20-N-1002-01A | Collar screw, rear bumper to body | Nm | 9 | 9 | |
Long wedge
115 589 03 59 00