ar8810p1300rt

Remove/install fender liner in front fender

Type ar · emne 88.10 · version 0100 · 2005-05-10

Gælder for: MODEL 251

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 88 Monteringsdele, udvendige klapper › 88.10 Skærme — Serie 251

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.37 Skærm › 35.37.40 Inderskærm — Serie 251

AR88.10-P-1300RT

Remove/install fender liner in front fender

2.2.05

MODEL 251

Remove/install fender liner in front fender

P88.10-2173-09

1 Fender liner in front fender

2 Nut

3 Expansion rivets

4 Expansion rivets

5 Nut

Remove/Install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Lift/jack up vehicle

AR00.60-P-1000RT

2

Remove front section of fender liner in front fender (1)

AR88.10-P-1310RT

3

Unscrew nut (2)

4

Remove expansion rivets (3, 4)

5

Unscrew nut (5)

6

Remove fender liner in front fender (1)

Installation: Ensure that fender liner is seated correctly in front fender (1)

7

Install in the reverse order

Henviste dokumenter