ar8810p1310rt

Remove/install fender liner front section in front fender

Type ar · emne 88.10 · version 0100 · 2005-05-02

Gælder for: MODELS 251

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 88 Monteringsdele, udvendige klapper › 88.10 Skærme — Serie 251

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.37 Skærm › 35.37.40 Inderskærm — Serie 251

AR88.10-P-1310RT

Remove/install fender liner front section in front fender

2.2.05

MODELS 251

Remove/install fender liner front section in front fender

P88.10-2172-09

1 Front section of inner fender

2 Nut

3 Bolts

4 Nut

5 Bolts

6 Bolt

7 Expanding rivets

Remove/Install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates below the hoist support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Lift/jack up vehicle

AR00.60-P-1000RT

2

Unscrew nut (2)

3

Remove bolts (3)

4

Unscrew nut (4)

5

Loosen the screws (5).

6

Unscrew bolt (6)

7

Remove expansion rivets (7)

8

Lift rear section of fender liner in fender

Lift rear section of fender liner on upper overlap with mounting wedge until front section of fender liner (1) can be removed from fender

Mounting wedge

*110589035900

9

Remove front fender liner section (1) from fender

10

Install in the reverse order

Remove/install fender liner front section in front fender

Mounting wedge

110 589 03 59 00

Henviste dokumenter