Remove/install rear Mercedes star

AR88.00-S-0022P

Remove/install rear Mercedes star

01.02.2018

Model

470, 471

1

Mercedes star

2

Retaining grommets

3

Pins

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

 

Remove/install

1

Remove truckbed liner

Model 470, 471
with code Y1O (Load bed trim)
except code Y1D (Hardtop)
except code Y1E (Hardtop with roof railing)
except code Y1P (Hard cover)

AR60.30-S-0018P

Model 470, 471
with code Y1D (Hardtop)
with code Y1O (Load bed trim)
Model 470, 471
with code Y1E (Hardtop with roof railing)
with code Y1O (Load bed trim)
Model 470, 471
with code Y1O (Load bed trim)
with code Y1P (Hard cover)

AR60.30-S-0018PA

2

Remove inside cover on dropside

AR60.30-S-0016-01P

3

Press out pins (3) using suitable tool

 For this purpose, press out pins (3) from inside until Mercedes star (1) is slightly raised at the outside.

 Installation: Check retaining grommets (2) for damage.

Depending on findings



Replace damaged retaining grommets (2).

4

Remove Mercedes star (1)

 For this purpose, carefully pry off Mercedes star (1).

 Installation: Replace Mercedes star (1). Observe marking for installation position on new part.

 Long wedge

*115589035900

5

Install in the reverse order