ar8370w593601a

Remove/install upper housing segment and covers

Type ar · emne 83.70 · version 0106 · 2004-09-17

Gælder for: MODEL 375.4 with BODY 375.840 with CODE (H61) "Webasto" Air Top 2000 hot air auxiliary heater MODEL 944 with BODY 944.899 with CODE (H61) "Webasto" Air Top 2000 hot air auxiliary heater MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (H61) "Webasto" Air Top 2000 hot air auxiliary heater MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (H61) Webasto Air Top 2000 hot air auxiliary heater MODEL 950, 952, 953, 954 with BODY 940.899 with CODE (H61) "Webasto" Air Top 2000 hot air auxiliary h

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 83 Klimatisering › 83.70 Parkeringsvarmesystem, ekstra varmesystem, ekstra varmeapparat — Serie 375 (modeller 4**, 840) · Serie 940 (modeller 899) · Serie 942 (modeller 899) · Serie 944 · Serie 950 · Serie 952 · Serie 953 · Serie 954 · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 39 Varmesystem/ventilation/køling › 39.25 Parkeringsvarme/ekstra varmesystem › 39.25.30 varmeapparat — Serie 375 (modeller 4**, 840) · Serie 940 (modeller 899) · Serie 942 (modeller 899) · Serie 944 · Serie 950 · Serie 952 · Serie 953 · Serie 954 · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

AR83.70-W-5936-01A

Remove/install upper housing segment and covers

Danger!

Risk of explosion from fuel vapors, risk of poisoning from inhaling combustion gases and risk of injury from burns during and after operation of heater unit.

Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves.

AS83.70-Z-0002-01A

Remove/install upper housing segment and covers

W83.70-0644-06

Remove/install

1 Remove cover (1).

2 Remove heated air outlet cover (3) and heated air inlet cover (5).

Both covers can be separated from the upper and lower housing segments (2, 4) by a sliding motion.

Remove/install upper housing segment and covers

W83.70-0662-01

4 Press in all retaining wedges (arrows) one after the other using a suitable screwdriver and slightly raise the upper housing segment (1) while doing so.

Installation: The retaining wedges must be securely engaged in the recess clearances.

5 Remove upper housing segment (1).

6 Install in reverse sequence.

Henviste dokumenter