AR83.70-W-5757B | Remove and install heating element | 2.5.96 |
MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (H64) Eberspächer D9W hot water auxiliary heater
1 Cover plate
2 Cable retainer
3 Electrical line
4 Glow pin
W83.70-0003-03
| Remove/Install | ||
1 | Disconnect ground lead from battery | Do not interrupt main battery current in heater mode or in the run-on phase. | |
Danger! | Risk of injury caused by body parts being jammed and crushed when tilting cab | Ensure that no one is within the tilting range of the cab during tilting. Always tilt the cab all the way to the end position and secure with the safety strut. | |
2 | Tilt cab | ||
3 | Remove auxiliary heater control unit | ||
4 | Remove cover plate (1) | | |
5 | Take cable retainer (2) out of installation seat | ||
6 | Detach electric cable (3) | | |
7 | Remove glow pin (4) | | |
8 | Install in the reverse order | ||
Danger! | Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit | Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves. | |
9 | Check function of stationary heater |
Stationary heater unit
Henviste dokumenter
- ar8370w530202b
- ar8370w5937a
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes
- as8370z000201a Fare for eksplosion på grund af brændstofdampe, fare for forgiftning ved indånding af forbrændingsgas og fare for personskade på grund af forbrændinger, under eller efter at varmesystemet har været i drift.